Omron Plc

Approx. Rs 3.2 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

 Implemented OPC UA as a standard feature Integration of Logic and Motion in one CPU onforms to IEC 61131-3 (JIS B 3503) standard programming and PLCopen function blocks for Motion Control.

Programming with variables allows users to create complex programs efficiently.Fast and accurate control by synchronizing all EtherCAT devices, such as vision sensors, servo drives, and field devices, with the PLC and Motion Engines.Offers speed without compromising on reliability and robustness expected from PLCs.Complete RAS functions: Transmission frame error check, timeout, bus diagnosis, Watchdog (WDT), memory check, and topology check, etc.Linear and circular interpolation. Electronic gear and cam synchronization.The Controller can be directly connected to a database. No special Unit, software, nor middleware is required. (NJ501-[][]20)

Approx. Rs 37,200 / PieceGet Latest Price

Product BrochureProduct Details:

Up to eight analog inputs per unit NX-AD.Up to four analog outputs per unit (NX-DA).Free-run refreshing or synchronous I/O refreshing with the NX1P2 CPU Unit or EtherCAT Coupler Unit.Sampling times down to 10 μs per channel and high resolution of 1/30,000.Single-ended input type with built-in power supply terminals for low power equipments or noize-resistant differential input type (NX-AD).Selecting channel to use, moving average, input disconnection detection, over range/under range detection, and user calibration, Detachable front connector with screwless Push-In Plus terminals for easy installation and maintenance Compact with a width of 12 mm per unit.Connect to the CJ PLC using the EtherNet/IPTM bus coupler.Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.EtherNet/IPTM is a trademark of ODVA.Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.Open collector output type and line driver output type Incremental Encoders can be connected.High-speed remote I/O control with communications cycle as fast as 125 μs*1.Free-run refreshing, synchronous I/O refreshing, or task period prioritised refreshing*2 with the NX1P2 CPU Unit r EtherCAT Coupler Unit.The MC Function Modules of the NJ/NX/NY5 Controllers allows the encoder to be used as a motion axis.Latching (1 internal signal and 2 input signals from external devices.Pulse Period Measurement. 32 bit counters (80000000 to 7FFFFFFF HEX). Maximum counting rate: 4 MHz (Line receiver: 4 MHz, Open collector: 500 kHz).Time Stamping.Maximum and minimum counter value setting.Connect to the CJ PLC using the EtherNet/IPTM bus coupler.When using the NX-EC01[][] together with the NX701-[][][][] and NX-ECC203. Task Period Prioritised refreshing is available when the NX-ECC203 is used together.Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany. EtherNet/IP™ is a trademark of ODVA.Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 51,300 / PieceGet Latest Price

Product BrochureProduct Details:

 SSI clock frequency up to 2 MHzHigh-speed remote I/O control with communications cycle as fast as 125 μs*1Free-run refreshing, synchronous I/O refreshing, or task period prioritised refreshing*2 with the NX1P2 CPU Unit or EtherCAT Coupler Unit. The MC Function Modules of the NJ/NX/NY5 Controllers allows the encoder to be used as a motion axis. Choice of SSI Coding Methods (No conversion, binary code, or grey code.Time StampingMulti-turn and single-turn encoders supported.Data Refresh Status (Data refreshing can be checked on the host controller.Maximum connecting SSI cable length: 400 mConnect to the CJ PLC using the EtherNet/IPTM bus coupler.When using the NX-EC01[][] together with the NX701-[][][][] and NX-ECC203.. Task Period Prioritised refreshing is available when the NX-ECC203 is used together.Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany. EtherNet/IP™ is a trademark of ODVA.Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 25,200 / PieceGet Latest Price

Product BrochureProduct Details:

Up to eight analog inputs per unit NX-AD.Up to four analog outputs per unit (NX-DA).Free-run refreshing or synchronous I/O refreshing with the NX1P2 CPU Unit or EtherCAT Coupler Unit.Sampling times down to 10 μs per channel and high resolution of 1/30,000.Single-ended input type with built-in power supply terminals for low power equipments or noize-resistant differential input type (NX-AD).Selecting channel to use, moving average, input disconnection detection, over range/under range detection, and user calibration, Detachable front connector with screwless Push-In Plus terminals for easy installation and maintenance Compact with a width of 12 mm per unit.Connect to the CJ PLC using the EtherNet/IPTM bus coupler.Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.EtherNet/IPTM is a trademark of ODVA.Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 32,100 / PieceGet Latest Price

Product BrochureProduct Details:

The NX1 can utilise information, take safety measures, and control quality while at the same time improving production efficiency through high-speed, high-precision control.This contributes to continuous improvement in productivity.he NX1 provides high-speed control while utilising information.For example, the NX1 used for a packaging machine with the capability of handling 1,000 products per minute can collect all traceability data in synchronisation with the production cycle while performing motion control.The NX1 is the frst in the world* to integrate two different open networks: EtherNet/IP™ for scalable safety control in production lines and EtherCAT® for fast and reliable redundant safety control in machines. Furthermore, it integrates safety control into machine control in lines that require fast cycle times.This integration allows you to standardise machines and build flexible lines.Based on Omron investigation in March 2018.Although special inspection machines with built-in PC are widely used for high-speed inspections, they require special maintenance skills.Therefore, acceptance sampling is often carried out offline to prevent line stoppages.The NX1 can be used in conjunction with the High-speed Analog Input Unit to collect measurement data within a fixed cycle time of 5 μs. This standard controller eliminates the need for special machines with PC and can be maintained by on-site engineers. Inline inspections of all products can also be conducted easily.

Approx. Rs 10,840 / PieceGet Latest Price

Product BrochureProduct Details:

The NX1 can utilise information, take safety measures, and control quality while at the same time improving production efficiency through high-speed, high-precision control.This contributes to continuous improvement in productivity.he NX1 provides high-speed control while utilising information.For example, the NX1 used for a packaging machine with the capability of handling 1,000 products per minute can collect all traceability data in synchronisation with the production cycle while performing motion control.The NX1 is the frst in the world* to integrate two different open networks: EtherNet/IP™ for scalable safety control in production lines and EtherCAT® for fast and reliable redundant safety control in machines. Furthermore, it integrates safety control into machine control in lines that require fast cycle times.This integration allows you to standardise machines and build flexible lines.Based on Omron investigation in March 2018.Although special inspection machines with built-in PC are widely used for high-speed inspections, they require special maintenance skills.Therefore, acceptance sampling is often carried out offline to prevent line stoppages.The NX1 can be used in conjunction with the High-speed Analog Input Unit to collect measurement data within a fixed cycle time of 5 μs. This standard controller eliminates the need for special machines with PC and can be maintained by on-site engineers. Inline inspections of all products can also be conducted easily.

Approx. Rs 12,000 / PieceGet Latest Price

Product BrochureProduct Details:

The NX1 can utilise information, take safety measures, and control quality while at the same time improving production efficiency through high-speed, high-precision control.This contributes to continuous improvement in productivity.he NX1 provides high-speed control while utilising information.For example, the NX1 used for a packaging machine with the capability of handling 1,000 products per minute can collect all traceability data in synchronisation with the production cycle while performing motion control.The NX1 is the frst in the world* to integrate two different open networks: EtherNet/IP™ for scalable safety control in production lines and EtherCAT® for fast and reliable redundant safety control in machines. Furthermore, it integrates safety control into machine control in lines that require fast cycle times.This integration allows you to standardise machines and build flexible lines.Based on Omron investigation in March 2018.Although special inspection machines with built-in PC are widely used for high-speed inspections, they require special maintenance skills.Therefore, acceptance sampling is often carried out offline to prevent line stoppages.The NX1 can be used in conjunction with the High-speed Analog Input Unit to collect measurement data within a fixed cycle time of 5 μs. This standard controller eliminates the need for special machines with PC and can be maintained by on-site engineers. Inline inspections of all products can also be conducted easily.

Approx. Rs 17,800 / PieceGet Latest Price

Product BrochureProduct Details:

The NX1 can utilise information, take safety measures, and control quality while at the same time improving production efficiency through high-speed, high-precision control.This contributes to continuous improvement in productivity.he NX1 provides high-speed control while utilising information.For example, the NX1 used for a packaging machine with the capability of handling 1,000 products per minute can collect all traceability data in synchronisation with the production cycle while performing motion control.The NX1 is the frst in the world* to integrate two different open networks: EtherNet/IP™ for scalable safety control in production lines and EtherCAT® for fast and reliable redundant safety control in machines. Furthermore, it integrates safety control into machine control in lines that require fast cycle times.This integration allows you to standardise machines and build flexible lines.Based on Omron investigation in March 2018.Although special inspection machines with built-in PC are widely used for high-speed inspections, they require special maintenance skills.Therefore, acceptance sampling is often carried out offline to prevent line stoppages.The NX1 can be used in conjunction with the High-speed Analog Input Unit to collect measurement data within a fixed cycle time of 5 μs. This standard controller eliminates the need for special machines with PC and can be maintained by on-site engineers. Inline inspections of all products can also be conducted easily.

Approx. Rs 11,000 / PieceGet Latest Price

Product BrochureProduct Details:

High-speed I/O refreshing using the EtherCAT couplerI/O refreshing synchronised with the control cycle of the controller (synchronous refreshing)Time-stamp inputs and outputs anywhere in the EtherCAT network can be independently controlled with sub-microsecond accuracyDetachable terminals for easy maintenanceScrewless Push-In Plus terminal block or MIL/Fujitsu connector speeds up installationCompact with a width of 12 mm per unit (connector type: 30 mm)4, 8, 16 or 32 inputs for flexible I/O configuration (NX-ID/IA)2, 4, 8, 16 or 32 outputs for flexible I/O configuration (NX-OD/OC)Connect to the CJ PLC using the EtherNet/IPTM bus couplerSysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.EtherNet/IP™ is a trademark of ODVA.Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 14,150 / PieceGet Latest Price

Product BrochureProduct Details:

High-speed I/O refreshing using the EtherCAT couplerI/O refreshing synchronised with the control cycle of the controller (synchronous refreshing)Time-stamp inputs and outputs anywhere in the EtherCAT network can be independently controlled with sub-microsecond accuracyDetachable terminals for easy maintenanceScrewless Push-In Plus terminal block or MIL/Fujitsu connector speeds up installationCompact with a width of 12 mm per unit (connector type: 30 mm)4, 8, 16 or 32 inputs for flexible I/O configuration (NX-ID/IA)2, 4, 8, 16 or 32 outputs for flexible I/O configuration (NX-OD/OC)Connect to the CJ PLC using the EtherNet/IPTM bus couplerSysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.EtherNet/IP™ is a trademark of ODVA.Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 10,000 / PieceGet Latest Price

Product BrochureProduct Details:

High-speed I/O refreshing using the EtherCAT couplerI/O refreshing synchronised with the control cycle of the controller (synchronous refreshing)Time-stamp inputs and outputs anywhere in the EtherCAT network can be independently controlled with sub-microsecond accuracyDetachable terminals for easy maintenanceScrewless Push-In Plus terminal block or MIL/Fujitsu connector speeds up installationCompact with a width of 12 mm per unit (connector type: 30 mm)4, 8, 16 or 32 inputs for flexible I/O configuration (NX-ID/IA)2, 4, 8, 16 or 32 outputs for flexible I/O configuration (NX-OD/OC)Connect to the CJ PLC using the EtherNet/IPTM bus couplerSysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.EtherNet/IP™ is a trademark of ODVA.Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 46,600 / PieceGet Latest Price

Product BrochureProduct Details:

Up to eight analog inputs per unit NX-AD.Up to four analog outputs per unit (NX-DA).Free-run refreshing or synchronous I/O refreshing with the NX1P2 CPU Unit or EtherCAT Coupler Unit.Sampling times down to 10 μs per channel and high resolution of 1/30,000.Single-ended input type with built-in power supply terminals for low power equipments or noize-resistant differential input type (NX-AD).Selecting channel to use, moving average, input disconnection detection, over range/under range detection, and user calibration, Detachable front connector with screwless Push-In Plus terminals for easy installation and maintenance Compact with a width of 12 mm per unit.Connect to the CJ PLC using the EtherNet/IPTM bus coupler.Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.EtherNet/IPTM is a trademark of ODVA.Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.Open collector output type and line driver output type Incremental Encoders can be connected.High-speed remote I/O control with communications cycle as fast as 125 μs*1.Free-run refreshing, synchronous I/O refreshing, or task period prioritised refreshing*2 with the NX1P2 CPU Unit r EtherCAT Coupler Unit.The MC Function Modules of the NJ/NX/NY5 Controllers allows the encoder to be used as a motion axis.Latching (1 internal signal and 2 input signals from external devices.Pulse Period Measurement. 32 bit counters (80000000 to 7FFFFFFF HEX). Maximum counting rate: 4 MHz (Line receiver: 4 MHz, Open collector: 500 kHz).Time Stamping.Maximum and minimum counter value setting.Connect to the CJ PLC using the EtherNet/IPTM bus coupler.When using the NX-EC01[][] together with the NX701-[][][][] and NX-ECC203. Task Period Prioritised refreshing is available when the NX-ECC203 is used together.Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany. EtherNet/IP™ is a trademark of ODVA.Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 14,200 / PieceGet Latest Price

Product BrochureProduct Details:

 

Pulse output for 4 axes. Advanced power for high-precision positioning control.High-speed counters. Differential phases for 4 axes. Easily handles multi-axis control with a single unit. Eight interrupt inputs are built in. Faster processing of approximately 500 instructions speeds up the entire system.Serial communications. Two ports. Select Option Boards for either RS-232C or RS-485 communications.Ethernet Communications. Enabled by using an Option Board. Two ports can be used as an Ethernet port to perform. Ethernet communications between the CP1H and a host computer.Built- Analog I/O. XA CPU Units provide 4 input words and 2 output words.USB Peripheral Port. Another standard feature.The structured text (ST) language. Makes maths operations even easier. Can be used for the CP1W series and CJ series Unit. The extendibility of it is preeminently good.LCD displays and settings. Enabled using Option Board.

Approx. Rs 60,300 / PieceGet Latest Price

Product BrochureProduct Details:

 

Pulse output for 4 axes. Advanced power for high-precision positioning control.High-speed counters. Differential phases for 4 axes. Easily handles multi-axis control with a single unit. Eight interrupt inputs are built in. Faster processing of approximately 500 instructions speeds up the entire system.Serial communications. Two ports. Select Option Boards for either RS-232C or RS-485 communications.Ethernet Communications. Enabled by using an Option Board. Two ports can be used as an Ethernet port to perform. Ethernet communications between the CP1H and a host computer.Built- Analog I/O. XA CPU Units provide 4 input words and 2 output words.USB Peripheral Port. Another standard feature.The structured text (ST) language. Makes maths operations even easier. Can be used for the CP1W series and CJ series Unit. The extendibility of it is preeminently good.LCD displays and settings. Enabled using Option Board.

Approx. Rs 60,300 / PieceGet Latest Price

Product BrochureProduct Details:

 

Pulse output for 4 axes. Advanced power for high-precision positioning control.High-speed counters. Differential phases for 4 axes. Easily handles multi-axis control with a single unit. Eight interrupt inputs are built in. Faster processing of approximately 500 instructions speeds up the entire system.Serial communications. Two ports. Select Option Boards for either RS-232C or RS-485 communications.Ethernet Communications. Enabled by using an Option Board. Two ports can be used as an Ethernet port to perform. Ethernet communications between the CP1H and a host computer.Built- Analog I/O. XA CPU Units provide 4 input words and 2 output words.USB Peripheral Port. Another standard feature.The structured text (ST) language. Makes maths operations even easier. Can be used for the CP1W series and CJ series Unit. The extendibility of it is preeminently good.LCD displays and settings. Enabled using Option Board.

Approx. Rs 33,800 / PieceGet Latest Price

Product BrochureProduct Details:

 

Pulse output for 4 axes. Advanced power for high-precision positioning control.High-speed counters. Differential phases for 4 axes. Easily handles multi-axis control with a single unit. Eight interrupt inputs are built in. Faster processing of approximately 500 instructions speeds up the entire system.Serial communications. Two ports. Select Option Boards for either RS-232C or RS-485 communications.Ethernet Communications. Enabled by using an Option Board. Two ports can be used as an Ethernet port to perform. Ethernet communications between the CP1H and a host computer.Built- Analog I/O. XA CPU Units provide 4 input words and 2 output words.USB Peripheral Port. Another standard feature.The structured text (ST) language. Makes maths operations even easier. Can be used for the CP1W series and CJ series Unit. The extendibility of it is preeminently good.LCD displays and settings. Enabled using Option Board.

Approx. Rs 54,700 / PieceGet Latest Price

Product BrochureProduct Details:

Efficient solution for a flexible production, traceability and monitoring of machine key assets, to respond to operational excellence.Improved connectivity to networking and serial devices.Reduced development time with function blocks (FBs) programming.Battery-free operation increases robustness and reduces maintenance. The extended operating temperature range increases reliability for special applications.

Approx. Rs 34,300 / PieceGet Latest Price

Product BrochureProduct Details:

Efficient solution for a flexible production, traceability and monitoring of machine key assets, to respond to operational excellence.Improved connectivity to networking and serial devices.Reduced development time with function blocks (FBs) programming.Battery-free operation increases robustness and reduces maintenance. The extended operating temperature range increases reliability for special applications.

Approx. Rs 7.36 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

he NJ-series Machine Automation Controller supports the Database Connection function. Machine data can be quickly stored in a database by connecting the Controller directly to the database.Please purchase a DVD and required number of licences the first time you purchase the Sysmac Studio. DVDs and licenses are available individually. Each model of licences does not include any DVD.ModelSYSMAC-SE200D-64" runs on Windows 10 (64 bit) or higher. Multi licences are available for the Sysmac Studio (3, 10, 30, or 50 licences). This product is a licence only. You need the Sysmac Studio Standard Edition DVD media to install it.

 

Approx. Rs 7,900 / PieceGet Latest Price

Product BrochureProduct Details:

 Case model, 100 to 240 VAC, Power rating 60 W, Output: 24 VDC, Terminal blocks (Rod terminal), Parallel operation, Harmonic current emissions.Between all input terminals and all output terminals: 3 kVAC for 1 min, Cut-off current: 20 mABetween all input terminals and PE terminals: 2 kVAC for 1 min, Cut-off current: 20 mA.Between all output terminals and PE terminals: 1 kVAC for 1 min, Cut-off current: 20 mA Between all output terminals and all input terminals/ PE terminals: 100 MΩ min., at 500 VDC10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours

 

Approx. Rs 26,200 / PieceGet Latest Price

Product BrochureProduct Details:

Up to eight analog inputs per unit NX-AD.Up to four analog outputs per unit (NX-DA).Free-run refreshing or synchronous I/O refreshing with the NX1P2 CPU Unit or EtherCAT Coupler Unit.Sampling times down to 10 μs per channel and high resolution of 1/30,000.Single-ended input type with built-in power supply terminals for low power equipments or noize-resistant differential input type (NX-AD).Selecting channel to use, moving average, input disconnection detection, over range/under range detection, and user calibration, Detachable front connector with screwless Push-In Plus terminals for easy installation and maintenance Compact with a width of 12 mm per unit.Connect to the CJ PLC using the EtherNet/IPTM bus coupler.Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.EtherNet/IPTM is a trademark of ODVA.Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 26,200 / PieceGet Latest Price

Product BrochureProduct Details:

Up to eight analog inputs per unit NX-AD.Up to four analog outputs per unit (NX-DA).Free-run refreshing or synchronous I/O refreshing with the NX1P2 CPU Unit or EtherCAT Coupler Unit.Sampling times down to 10 μs per channel and high resolution of 1/30,000.Single-ended input type with built-in power supply terminals for low power equipments or noize-resistant differential input type (NX-AD).Selecting channel to use, moving average, input disconnection detection, over range/under range detection, and user calibration, Detachable front connector with screwless Push-In Plus terminals for easy installation and maintenance Compact with a width of 12 mm per unit.Connect to the CJ PLC using the EtherNet/IPTM bus coupler.Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.EtherNet/IPTM is a trademark of ODVA.Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 2.11 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

The NJ-series Machine Automation Controller supports the Database Connection function. Machine data can be quickly stored in a database by connecting the Controller directly to the database.Please purchase a DVD and required number of licences the first time you purchase the Sysmac Studio. DVDs and licenses are available individually. Each model of licences does not include any DVD.ModelSYSMAC-SE200D-64" runs on Windows 10 (64 bit) or higher. Multi licences are available for the Sysmac Studio (3, 10, 30, or 50 licences). This product is a licence only. You need the Sysmac Studio Standard Edition DVD media to install it.

this option can be used by applying the Team Development Option to Sysmac Studio version 1 higher.Project version control function is supported by CPU Unit version 1.16 or later

Approx. Rs 19,200 / PieceGet Latest Price

Product BrochureProduct Details:

 Case model, 100 to 240 VAC, Power rating 60 W, Output: 24 VDC, Terminal blocks (Rod terminal), Parallel operation, Harmonic current emissions.Between all input terminals and all output terminals: 3 kVAC for 1 min, Cut-off current: 20 mABetween all input terminals and PE terminals: 2 kVAC for 1 min, Cut-off current: 20 mA.Between all output terminals and PE terminals: 1 kVAC for 1 min, Cut-off current: 20 mA Between all output terminals and all input terminals/ PE terminals: 100 MΩ min., at 500 VDC10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours

 

Approx. Rs 32,100 / PieceGet Latest Price

Product BrochureProduct Details:

Efficient solution for a flexible production, traceability and monitoring of machine key assets, to respond to operational excellence.Improved connectivity to networking and serial devices.

Reduced development time with function blocks (FBs) programming.

Battery-free operation increases robustness and reduces maintenance. The extended operating temperature range increase reliability for special applications.

Approx. Rs 32,100 / PieceGet Latest Price

Product BrochureProduct Details:

Efficient solution for a flexible production, traceability and monitoring of machine key assets, to respond to operational excellence.Improved connectivity to networking and serial devices.

Reduced development time with function blocks (FBs) programming.

Battery-free operation increases robustness and reduces maintenance. The extended operating temperature range increase reliability for special applications.

Approx. Rs 61,000 / PieceGet Latest Price

Product BrochureProduct Details:

Efficient solution for a flexible production, traceability and monitoring of machine key assets, to respond to operational excellence.Improved connectivity to networking and serial devices.

Reduced development time with function blocks (FBs) programming.

Battery-free operation increases robustness and reduces maintenance. The extended operating temperature range increase reliability for special applications.

Approx. Rs 5.01 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

 Implemented OPC UA as a standard feature Integration of Logic and Motion in one CPU. Conforms to IEC 61131-3 (JIS B 3503) standard programming and PLCopen function blocks for Motion Control.Programming with variables allows users to create complex programs efficiently.Fast and accurate control by synchronizing all EtherCAT devices, such as vision sensors, servo drives, and field devices, with the PLC and Motion Engines.Offers speed without compromising on reliability and robustness expected from PLCs.Complete RAS functions: Transmission frame error check, timeout, bus diagnosis, Watchdog (WDT), memory check, and topology check, etc.Linear and circular interpolation.Electronic gear and cam synchronization. The Controller can be directly connected to a database. No special Unit, software, nor middleware is required. (NJ501-[][]20)

Approx. Rs 3,850 / PieceGet Latest Price

Product BrochureProduct Details:

Units to feed in additional Unit power and I/O power to an NX-series remote I/O terminal.Screwless clamp terminal block significantly reduces wiring work.Space-saving 12 mm wide units.The NX Unit Power Supply Unit allows expansion of the I/O configuration beyond the maximum power supply capacity of the EtherCAT CouplerThe I/O Power Supply Unit is used when the total allowed I/O current per feed terminal is exceeded, or to split I/O power into groups.The I/O Power Connection Unit can be used as an additional power supply terminal for connected sensors and actuators.The FG Terminal Expansion Unit can be used as ground terminal for wire shields.Thescrewless erminal block is detachable for easy commissioning and maintenance.Sysmac is a trademark or registered trademarkof OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark of Beckhoff Automation GmbH for their patented technology. EtherNet/IP^TM is the trademarks of ODVA.Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 40,200 / PieceGet Latest Price

Product BrochureProduct Details:

The NX1 can utilise information, take safety measures, and control quality while at the same time improving production efficiency through high-speed, high-precision control.This contributes to continuous improvement in productivity.he NX1 provides high-speed control while utilising information.For example, the NX1 used for a packaging machine with the capability of handling 1,000 products per minute can collect all traceability data in synchronisation with the production cycle while performing motion control.The NX1 is the frst in the world* to integrate two different open networks: EtherNet/IP™ for scalable safety control in production lines and EtherCAT® for fast and reliable redundant safety control in machines. Furthermore, it integrates safety control into machine control in lines that require fast cycle times.This integration allows you to standardise machines and build flexible lines.Based on Omron investigation in March 2018.Although special inspection machines with built-in PC are widely used for high-speed inspections, they require special maintenance skills.Therefore, acceptance sampling is often carried out offline to prevent line stoppages.The NX1 can be used in conjunction with the High-speed Analog Input Unit to collect measurement data within a fixed cycle time of 5 μs. This standard controller eliminates the need for special machines with PC and can be maintained by on-site engineers. Inline inspections of all products can also be conducted easily.

Approx. Rs 58,100 / PieceGet Latest Price

Product BrochureProduct Details:

 SSI clock frequency up to 2 MHzHigh-speed remote I/O control with communications cycle as fast as 125 μs*1Free-run refreshing, synchronous I/O refreshing, or task period prioritised refreshing*2 with the NX1P2 CPU Unit or EtherCAT Coupler Unit. The MC Function Modules of the NJ/NX/NY5 Controllers allows the encoder to be used as a motion axis. Choice of SSI Coding Methods (No conversion, binary code, or grey code.Time StampingMulti-turn and single-turn encoders supported.Data Refresh Status (Data refreshing can be checked on the host controller.Maximum connecting SSI cable length: 400 mConnect to the CJ PLC using the EtherNet/IPTM bus coupler.When using the NX-EC01[][] together with the NX701-[][][][] and NX-ECC203.. Task Period Prioritised refreshing is available when the NX-ECC203 is used together.Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany. EtherNet/IP™ is a trademark of ODVA.Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 3.08 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

The NJ-series Machine Automation Controller supports the Database Connection function. Machine data can be quickly stored in a database by connecting the Controller directly to the database.Please purchase a DVD and required number of licences the first time you purchase the Sysmac Studio. DVDs and licenses are available individually. Each model of licences does not include any DVD.ModelSYSMAC-SE200D-64" runs on Windows 10 (64 bit) or higher. Multi licences are available for the Sysmac Studio (3, 10, 30, or 50 licences). This product is a licence only. You need the Sysmac Studio Standard Edition DVD media to install it.

this option can be used by applying the Team Development Option to Sysmac Studio version 1 higher.Project version control function is supported by CPU Unit version 1.16 or later

Approx. Rs 23,100 / PieceGet Latest Price

Product BrochureProduct Details:

 Case model, 100 to 240 VAC, Power rating 60 W, Output: 24 VDC, Terminal blocks (Rod terminal), Parallel operation, Harmonic current emissions.Between all input terminals and all output terminals: 3 kVAC for 1 min, Cut-off current: 20 mABetween all input terminals and PE terminals: 2 kVAC for 1 min, Cut-off current: 20 mA.Between all output terminals and PE terminals: 1 kVAC for 1 min, Cut-off current: 20 mA Between all output terminals and all input terminals/ PE terminals: 100 MΩ min., at 500 VDC10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours

 

Approx. Rs 46,600 / PieceGet Latest Price

Product BrochureProduct Details:

Up to eight analog inputs per unit NX-AD.Up to four analog outputs per unit (NX-DA).Free-run refreshing or synchronous I/O refreshing with the NX1P2 CPU Unit or EtherCAT Coupler Unit.Sampling times down to 10 μs per channel and high resolution of 1/30,000.Single-ended input type with built-in power supply terminals for low power equipments or noize-resistant differential input type (NX-AD).Selecting channel to use, moving average, input disconnection detection, over range/under range detection, and user calibration, Detachable front connector with screwless Push-In Plus terminals for easy installation and maintenance Compact with a width of 12 mm per unit.Connect to the CJ PLC using the EtherNet/IPTM bus coupler.Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.EtherNet/IPTM is a trademark of ODVA.Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 20,600 / PieceGet Latest Price

Product BrochureProduct Details:

High-speed I/O refreshing using the EtherCAT couplerI/O refreshing synchronised with the control cycle of the controller (synchronous refreshing)Time-stamp inputs and outputs anywhere in the EtherCAT network can be independently controlled with sub-microsecond accuracyDetachable terminals for easy maintenanceScrewless Push-In Plus terminal block or MIL/Fujitsu connector speeds up installationCompact with a width of 12 mm per unit (connector type: 30 mm)4, 8, 16 or 32 inputs for flexible I/O configuration (NX-ID/IA)2, 4, 8, 16 or 32 outputs for flexible I/O configuration (NX-OD/OC)Connect to the CJ PLC using the EtherNet/IPTM bus couplerSysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.EtherNet/IP™ is a trademark of ODVA.Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 8,600 / PieceGet Latest Price

Product BrochureProduct Details:

High-speed I/O refreshing using the EtherCAT couplerI/O refreshing synchronised with the control cycle of the controller (synchronous refreshing)Time-stamp inputs and outputs anywhere in the EtherCAT network can be independently controlled with sub-microsecond accuracyDetachable terminals for easy maintenanceScrewless Push-In Plus terminal block or MIL/Fujitsu connector speeds up installationCompact with a width of 12 mm per unit (connector type: 30 mm)4, 8, 16 or 32 inputs for flexible I/O configuration (NX-ID/IA)2, 4, 8, 16 or 32 outputs for flexible I/O configuration (NX-OD/OC)Connect to the CJ PLC using the EtherNet/IPTM bus couplerSysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.EtherNet/IP™ is a trademark of ODVA.Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 60,300 / PieceGet Latest Price

Product BrochureProduct Details:

 

Pulse output for 4 axes. Advanced power for high-precision positioning control.High-speed counters. Differential phases for 4 axes. Easily handles multi-axis control with a single unit. Eight interrupt inputs are built in. Faster processing of approximately 500 instructions speeds up the entire system.Serial communications. Two ports. Select Option Boards for either RS-232C or RS-485 communications.Ethernet Communications. Enabled by using an Option Board. Two ports can be used as an Ethernet port to perform. Ethernet communications between the CP1H and a host computer.Built- Analog I/O. XA CPU Units provide 4 input words and 2 output words.USB Peripheral Port. Another standard feature.The structured text (ST) language. Makes maths operations even easier. Can be used for the CP1W series and CJ series Unit. The extendibility of it is preeminently good.LCD displays and settings. Enabled using Option Board.

Approx. Rs 3.97 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

Controller that covers functions and high-speed processing required for machine control and safety, reliability and maintainability that are the features of industrial controllers Ideal for small-scale control with up to 8 axes Integration of Logic and Motion in one CPU.Conforms to IEC 61131-3 (JIS B 3503) standard programming and PLCopen function blocks for Motion Control.Programming with variables allows users to create complex programs efficiently.Fast and accurate control by synchronising all EtherCAT devices, such as vision sensors, servo drives, and field devices, with the PLC and Motion Engines.Offers speed without compromising on reliability and robustness expected RAS functions:Transmission frame error check, timeout, bus diagnosis, Watchdog (WDT), memory check, and topology check, etc.

Approx. Rs 25,200 / PieceGet Latest Price

Product BrochureProduct Details:

Up to eight analog inputs per unit NX-AD.Up to four analog outputs per unit (NX-DA).Free-run refreshing or synchronous I/O refreshing with the NX1P2 CPU Unit or EtherCAT Coupler Unit.Sampling times down to 10 μs per channel and high resolution of 1/30,000.Single-ended input type with built-in power supply terminals for low power equipments or noize-resistant differential input type (NX-AD).Selecting channel to use, moving average, input disconnection detection, over range/under range detection, and user calibration, Detachable front connector with screwless Push-In Plus terminals for easy installation and maintenance Compact with a width of 12 mm per unit.Connect to the CJ PLC using the EtherNet/IPTM bus coupler.Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.EtherNet/IPTM is a trademark of ODVA.Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 34,300 / PieceGet Latest Price

Product BrochureProduct Details:

Efficient solution for a flexible production, traceability and monitoring of machine key assets, to respond to operational excellence.Improved connectivity to networking and serial devices.Reduced development time with function blocks (FBs) programming.Battery-free operation increases robustness and reduces maintenance. The extended operating temperature range increases reliability for special applications.